On carbide dissolution in an as‐cast ASTM F‐75 alloy M Caudillo, M Herrera–Trejo, MR Castro, E Ramírez, CR González, ... Journal of Biomedical Materials Research: An Official Journal of The Society …, 2002 | 110 | 2002 |
Quantification of the microconstituents formed during solidification by the Newton thermal analysis method H Cruz, C Gonzalez, A Juárez, M Herrera, J Juarez Journal of materials processing technology 178 (1-3), 128-134, 2006 | 68 | 2006 |
Structure and properties of Al–7Si–Ni and Al–7Si–Cu cast alloys nonmodified and modified with Sr JA Garcı́a-Hinojosa, CR Gonzalez, GM Gonzalez, Y Houbaert Journal of materials processing technology 143, 306-310, 2003 | 46 | 2003 |
Processing of ultra low carbon steels with mechanical properties adequate for automotive applications in the as-annealed condition R Mendoza, J Huante, M Alanis, C Gonzalez-Rivera, JA Juarez-Islas Materials Science and Engineering: A 276 (1-2), 203-209, 2000 | 46 | 2000 |
On the processing of Fe–C–Mn–Nb steels to produce plates for pipelines with sour gas resistance R Mendoza, M Alanis, R Perez, O Alvarez, C Gonzalez, JA Juarez-Islas Materials Science and Engineering: A 337 (1-2), 115-120, 2002 | 40 | 2002 |
Impeller design assisted by physical modeling and pilot plant trials M Hernández-Hernández, JL Camacho-Martínez, C González-Rivera, ... Journal of Materials Processing Technology 236, 1-8, 2016 | 35 | 2016 |
Effect of both radial position and number of porous plugs on chemical and thermal mixing in an industrial ladle involving two phase flow FD Maldonado-Parra, MA Ramírez-Argáez, AN Conejo, C González ISIJ international 51 (7), 1110-1118, 2011 | 35 | 2011 |
Comparison of the hydrodynamic performance of rotor-injector devices in a water physical model of an aluminum degassing ladle E Mancilla, W Cruz-Méndez, IE Garduño, C González-Rivera, ... Chemical Engineering Research and Design 118, 158-169, 2017 | 34 | 2017 |
Mathematical modeling of fluid flow in a water physical model of an aluminum degassing ladle equipped with an impeller-injector ER Gómez, R Zenit, CG Rivera, G Trápaga, MA Ramírez-Argáez Metallurgical and Materials Transactions B 44, 423-435, 2013 | 34 | 2013 |
Fourier thermal analysis of the solidification kinetics in A356/SiCp cast composites JC Baez, C Gonzalez, MR Chavez, M Castro, J Juarez Journal of materials processing technology 153, 531-536, 2004 | 33 | 2004 |
Solidification of chill-cast Al-Zn-Mg alloys to be used as sacrificial anodes C Gonzalez, J Genesca, O Alvarez, JA Juarez-Islas Metallurgical and Materials Transactions A 34, 2991-2997, 2003 | 31 | 2003 |
Effect of grain refinement treatment on the microstructure of cast Al–7Si–SiCp composites JA Garcia-Hinojosa, MK Surrapa Materials Science and Engineering: A 386 (1-2), 54-60, 2004 | 30 | 2004 |
Effect of Sr addition on an Al–7Si–10 vol.% SiCp cast composites JA Garcia-Hinojosa, CR Gonzalez, JI Juárez, MK Surappa Materials Science and Engineering: A 382 (1-2), 315-320, 2004 | 28 | 2004 |
Effect of the impeller design on degasification kinetics using the impeller injector technique assisted by mathematical modeling D Abreu-López, A Amaro-Villeda, FA Acosta-González, ... Metals 7 (4), 132, 2017 | 27 | 2017 |
Physical modeling of fluid flow in ladles of aluminum equipped with impeller and gas purging for degassing ER Gómez, R Zenit, CG Rivera, G Trápaga, MA Ramírez-Argáez Metallurgical and Materials Transactions B 44, 974-983, 2013 | 26 | 2013 |
Optimizing gas stirred ladles by physical modeling and PIV measurements LE Jardon Perez, A Amaro-Villeda, AN Conejo, C González-Rivera, ... Materials and Manufacturing Processes 33 (8), 882-890, 2018 | 25 | 2018 |
Characterization and prediction of microstructure in Al–Zn–Mg alloys O Alvarez, C Gonzalez, G Aramburo, R Herrera, JA Juarez-Islas Materials Science and Engineering: A 402 (1-2), 320-324, 2005 | 25 | 2005 |
On the local microstructural characteristics observed in sand cast Al–Si alloys C Gonzalez-Rivera, B Campillo, M Castro, M Herrera, J Juarez-Islas Materials Science and Engineering: A 279 (1-2), 149-159, 2000 | 24 | 2000 |
Structure of a low carbon Al-killed/Ti-added steel R Mendoza, J Camacho, G Lugo, C Lopez, L Herrera, J Reyes, ... ISIJ international 37 (2), 176-180, 1997 | 23 | 1997 |
Introducing the Planar Laser-Induced Fluorescence technique (PLIF) to measure mixing time in gas-stirred ladles LE Jardón-Pérez, A Amaro-Villeda, C González-Rivera, G Trápaga, ... Metallurgical and Materials Transactions B 50, 2121-2133, 2019 | 22 | 2019 |